Dual Action Polisher
Rotary
Cordless Polisher
Car Polisher Accessories
Wall & Wheel
Detailing Brush Holders Compound Holders
Dollies
Cart & Stool
Detailing bags
Accessories
Pad Kits
Foam Pads
High Pro
Medium Pro
Low Pro
Flat
Cross Cut
Wool Pads
Microfiber Pads
Orange Peel
Sand paper
Foam Interface
Rotary backing
Dual action backing
Car Exterior Cleaning Chemicals
Wheel and Tire Cleaners
Car Interior Care Chemical
Paint Correction & Enhancement Chemicals / Compounds
Paint Protection Chemicals
Subscription
Glass
Polish Removal & Coating Leveling
Coating Buffing & Rinseless Wash
General Purpose
Utility
Suede
Crazy Microfiber
Mitts
Pads
Gloves
Microfiber
Chenille
Wool
Interior
Exterior
Carpet
Pet Hair
Detail
Clay Mitts
Clay pads
Clay towels & sponges
Ceramic
Tire
Kits
Open-Box
Headlight Restoration
Headlight restoration is a process of restoring the clarity and brightness of plastic headlight lenses that have become dull or yellowed over time. This can be caused by exposure to the elements, UV rays, and other environmental factors. The good news is that headlight restoration is a relatively simple process that can be done at home with MaxShine’s Headlight Restoration Kit.
Step 1.
Clean the Headlight Lens
The first step in headlight restoration is to clean the lens. Start by washing the lens with a mild soap and water, and then dry it with a microfiber towel. This will remove any dirt, grime, or other debris that may be on the lens.
Sand the Headlight Lens
The next step is to sand the lens. Start by using the coarsest grit sandpaper (1000 grit) to remove any heavy oxidation or yellowing on the lens. Then continue with the remaining sandpaper getting finer as you go (2000 then 3000), to smooth out any remaining imperfections.
There's a few options for each grit of sandpaper. Some choose to do every step “wet” where they apply water or Clay Lube to the headlight and the surface of the sandpaper. Others choose to do the first two sandpaper grits dry and the final grit wet. The final (3000 grit) should always be done wet to help aid in removing fine marks and scratches from the previous sandpaper passes.
You can do each step with the tool that you prefer: Hand, Drill, or Polisher.
You can mix them to get the best results
What to expect with the different Sand Grit
Results may vary from case to case
Polish the Headlight Lens
After sanding, it's time to polish the lens. Use the polish that is included in the headlight restoration kit, and apply it to the lens with the included polishing pad.
BONUS
Apply a Protective Coating
The final step is to apply a protective coating to the lens. This will help to protect the lens from future damage and keep it looking clear and bright. There are several options available, including UV-resistant coatings and sealants. For the toughest and longest lasting protection we recommend MaxShine’s Graphene Ceramic Coating.
Check out the Results
To finish...
By following these simple steps, you can restore the clarity and brightness of your headlight lenses and improve your visibility while driving. Remember to take your time and use care when sanding and polishing the lens to avoid damaging it.
You can get everything you need with our Headlight Restoration KIT!!
Headlight Restoration Kit
Maxshine Headlight Restoration Kit is a collection of professional-grade products assembled specifically for removing the oxidation and yellowing that builds up on automotive headlight lenses.
This kit uses a system of light abrasives to keep vehicles looking great or to restore a used vehicle!
Headlight Restoration Kit
$24.99Headlight Restoration
Check out this video with Waxn 24/7 where everything about headlight restoration is explained!! Check out more videos on our Youtube Channel
Join Our Newsletter
Get our best deals and blogs!!
Engine
