Foam Polishing Pads – 5″, 6″ Low Profile Pad, Rubber Backed

Foam Polishing Pads | 5″/6″ Low Profile for cutting, finishing

These foam polishing pads are designed for low-profile foam pads, meeting the specific needs of long-throw dual-action polishers. The EVA ( Ethylene-vinyl acetate), a rubber foam inserted in the pad, provides heat and pressure absorption, further assisted by the center cut and tapered edge, allowing for heat dissipation while providing smooth contouring on small areas and curves. The foam polishing pads are color-coded for specific detailing tasks: Cutting (Green), Polishing (Yellow), and Finishing (Red), designed for professionally removing heavy swirl marks, scratches, and any chemical oxidation remaining on the car surfaces. You can clean, wash, and reuse them.

A long-throw polisher M21 Pro with a foam polishing pad | Finishing

The long-throw polishing pads for DA polishers – Features and Benefits:

• The low-profile foam polishing pad professionally removes heavy swirl marks, scratches, and chemical oxidation. 
• Compatible with long throw dual-action polishers with hook and look backing plates. 
• The EVA( Ethylene-vinyl acetate), a rubber foam insertion, provides heat and pressure absorption from buffing action, further assisted by the center cut to provide heat absorption.    
• They are washable and reusable, suitable for applying polishes, waxes, and sealants.
• Maxshine scientifically designed foam polishing pads, adapting them with high-quality material for detailing processes, including heavy cutting, polishing, and finishing.
• Dimensions and weight for 6-inch: 6.7-inch diameter x 0.76-inch width, 0.9 oz.
• Dimension and weight for 5-inch: 5.6-inch diameter x 0.77-inch width, 0.6 oz.

Comparison:

The table below explains the differences between high-pro foam pads and low-pro foam pads.

	High-pro foam pads	Low-pro foam pads
Product image
Difference	No rubber insertion	EVA insertion between the Hook & Loop and Foam
Applicability	DA and Rotary Polishers	DA polishers ONLY

Low-pro foam pad applications by the color

	Heavy cutting	Polishing	Finishing
Product image
Color	Green	Yellow	Red

Summary

The low-profile car polisher pads work on dual action for heavy cutting, polishing, and finishing, color-coded by green, blue, yellow, and red. They are designed for efficient heat dissipation through the center cut, while the optimized thickness and tapered edges allow smooth contouring on car surfaces, including curves.

People Also Asked

What is a long-throw dual-action polisher?

The long-throw dual-action polishers oscillate longer than 12mm. Below the 10mm throw range, the DA polishers are considered short-throw polishers.