The 2 Bucket Wash Method
A 2 bucket wash method is a technique used to ensure a scratch-free, thorough clean for your vehicle.
This method involves using two buckets, one for your wash solution and one for rinsing your wash mitt or pad.
This helps prevent dirt and debris from being reintroduced to the paint surface during the washing process.
Here’s a step-by-step guide on how to execute a multi bucket wash method:
Gather your supplies:
In addition to 2-3 buckets, you’ll need a Refresh Car Shampoo or an Ultra Foaming Wash, a Microfiber Wash Mitt or Pad, a Sand Killer Grit Guard for each bucket, and Microfiber Drying Towels.
If you want to upgrade your bucket car wash, add a pressure washer foam cannon or garden hose foam gun, bucket dollies for easier mobility, or a Mini Handheld Dryer to fully eliminate the chance of water spots.
Microfiber Drying Towels | 1200GSM Duo Twisted Loop Microfiber Drying Towel |
Step by Step
How to Wash a Car Two Bucket Wash Method
Mix the Shampoo or Foam Wash
In one bucket place the Sand Killer grit guard, add the appropriate amount of car wash soap, fill the bucket with water, then mix thoroughly.
Fill the second bucket with water
Use this bucket (with a Sand Killer grit guard) to rinse your wash mitt or pad of any dirt or debris collected after each section of the car is washed.
Start with the wheels
The wheels and tires can be some of the dirtiest parts of a car and this is where the optional third bucket comes in, if you so choose. Do not use any of the buckets in your two-bucket wash setup for wheel brushes.
Wheels are too heavily contaminated, and even the grit guards wouldn’t be able to entirely eliminate the risk of those contaminants getting into your wash mitt and then onto your car surface, likely causing scratches and marring.
Rinse the car
Before washing, rinse the car with a garden hose or pressure washer to remove loose dirt and debris. This will help to prevent scratches and swirls marks caused by washing a dirty car.
An optional step prior to the first rinse is a pre-wash. Using a foam cannon apply a layer of thick foaming car wash soap and let sit for a few minutes for the foam to encapsulate the dirt, then rinse away. This adds a layer of lubrication to the rinse to lower the risk of scratching.
Apply foam (optional)
To add an extra level of dirt removal and lubrication you could use a Foam Cannon. Foam encapsulates dirt particles on paint to aid in safe removal and added lubrication provides a slick surface to reduce marring and scratching when washing with a mitt or pad.
Wash one section at a time
Starting at the top of the car, wash one section at a time using the microfiber wash mitt or pad.
Dip the mitt in the sudsy solution, then wash the section of the car.
Rinse the mitt in the second bucket of water, gather more soap suds the first bucket, then continue to wash the next section.
Dry the car
After washing, use a microfiber towel to dry the car. Start at the top and work your way down.
MaxShine’s 1200GSM Twisted Loop and Vortex Drying Towels are capable of drying a whole car with just one large towel. Make sure to dry the car thoroughly to prevent water spots.
2 Bucket Wash Method
Be Gentle
Always be gentle when washing your car. Avoid using a lot of pressure as this can cause scratches and swirl marks. Use a gentle touch and let the soap and mitt do the work.
By using a 2 Bucket Wash Method, you can effectively remove dirt and debris from your car’s surfaces without reintroducing it during the washing process. This helps to prevent scratches and swirl marks, resulting in a cleaner, shinier car. Additionally, using grit guards in each bucket can help to keep dirt and debris from getting back on the car surface while washing.
To sum up, a 2 bucket wash method is a valuable way to help you to achieve a scratch-free, thorough clean for your vehicle. Using two buckets, one for the soap solution and one for rinsing the wash mitt, using grit guards, paying attention to the wheels, washing one section at a time, drying the car thoroughly, and being gentle are some of the key steps for a proper multi-bucket car wash process.
Following these tips for a 2 bucket wash method will help you to achieve a great looking car without causing any damage.
OUR LATEST ARTICLES
HEY YOU, SIGN UP AND CONNECT TO MAXSHINE!
Will be used in accordance with our Privacy Policy